The printer is perfect for on the go, working at trade shows and in the studio as it is completely portable so it fits in a drawer or travel bag.
Reliable quality in all environments and operating conditions, due to direct printing technology is guaranteed.
For stencils, clear outlines and not just shadows can be seen, as the printer is able to detect gray gradients.
For printing stencils, a stencil mode can be activated on the PJ8 series printers. This mode automatically adjusts the print density and flips the original horizontally.
It should be noted that a PC is required for the initial setup and the following drivers and software must be downloaded:
- Printer Driver
- Printer-Setting-Tool
- P-Touch Editor 5x
Link to download area: Drivers & Downloads: Printer Driver & more | Brother
Note: Without pre-configuration the Brother printer can NOT be used for printing Tattoo Stencil paper!
As carrier or ink reservoir serve here not as with a classical printer copy paper and printer ink.
As already known from thermal copiers, you only need a high-quality thermal paper, we recommend the thermal paper from Spirit, because here the best printing results are delivered.
Application:
- Remove the protective sheet and the yellow sheet from the transfer paper. At the end you have only the transfer sheet & carbon paper sheet.
- Insert the sheets into the thermal printer from the top with the print side facing up. The thermal printer will hold the sheet in place.
- Mirror the image on the PC. To increase the quality, you can increase the brightness in advance.
- Printing.
- After printing, open the front flap to take out the sheet and done!
Features:
- Support: Android, Windows, Mac and Linux.
- Interface: USB-C and Bluetooth, NFC (For pairing - Android only), Wi-Fi Direct.
- Print resolution: 300 dpi
- Print speed: up to 13.5 pages/minute
- Max. Print size: DIN A 4
- Dimensions: 255 x 30 x 55 mm
- Weight: 480 g
Scope of delivery:
- 1x Installation guide
- 1x USB Type C cable
- 1x Cleaning sheet
- 1x BROTHER - Mobile Printer - (PJ-883)
- 1x Protective cover of the Battery connector
Power Supply:
To use the printer completely mobile, you need the LI-ion battery PocketJet. (LI-Ion Battery PocketJet is not included)
At a fixed workstation, we recommend using the PocketJet power cable & AC adapter with EU connector.
Brother values flexibility in component selection and resource conservation. Therefore, neither a rechargeable Battery nor a power cord + AC adapter are included in the delivery, since some consumers only want to use the PocketJet on Battery power, or already have other power cords they want to continue using. Therefore, we point out to order the respective product in addition to the Brother Printer if necessary.